|
#941 BONDTEX®
Back to the Construction
Products Page
|
Color |
(Note 1) Black |
|
Polymer |
Blend |
|
Comp. Deflection (p.s.i.) |
(Note 2) |
|
Compression Set |
50 - 500 (Note 3) |
|
Density (p.c.f.) |
30 (Min) |
|
Water Absorption |
(Note 4) |
Temperature Range
Low/High F° |
+20°
to
150° |
|
High Intermitent F° |
200° |
Compression Set (Max.)
1/2" sample compressed 50%
22hr. @ 70°F & 24hr. Recovery |
(Note 5) |
Heat Aging (7 Days @ 158°F)
Lineal Shrinkage (Max.) |
2.0% |
|
Tensile Strength (Min.
P.S.I.) |
20 |
|
Elongation (Min) |
60% |
|
Solvent |
(Note 6) |
Notes
1) Color distribution may vary in solid and multi color
sheets.
2) Black Color
AASHTO M-153-70, Type 1 AASHTO M-153-67, Type 1
ASTM D-1752-84, Type 1
HH-F-341-E, Type II, Class A
HH-F-341-F, Type II, Class A
3) Baed on 50% compression per ASTM D-1752-84
4) Water absorption is intermediate between closed cell
and open cell and sponge. Although these materials are made from
closed-cell rubber Particles, there can be some water absorption
into the bonded structure between the individual particles of
closed-cellular material.
5) 90% Min. recovery per ASTM D-1752-84
6) Immension of BONDTEX® materials in gasoline, tolene,
naphitha and similar solvents is not recommended. Surface
contacts with these fluids may cause swelling and softening.
BONDTEX® materials are made to meet these listed specifications
and
are periodically tested for the above properties. Where
conditions of
use and/or properties desired are not covered by these listed
specifications and laboratory tests, we must be advised of this
in
writing; so that we can monitor continued product compliance
with the
amended requirements.
|
Click
below to see ISOLOSS® foam & CONFOR® foam
Click below to see
BONDTEX® product sizes
& specifications
Rebonded Closed
Cell
Sponge Rubber
The BONDTEX® line is now being
manufactured in our Santa Ana facility. This material is offered
in all standard and custom thickness.
Cork and cork rubber slit to thickness and width.
E-A-R
Specialty Composites manufactures high performance materials for
noise control, vibration damping, shock isolation and
cushioning, including acoustical foams, sound barriers,
energy-absorbing elastomers, and molded grommets and isolators.
http://www.earsc.com
|
